iSeries LAN WAN, #2723 PCI ETHERNET IOA

(#2723) PCI Ethernet IOA

(Only available as REFURBISHED as of December 28, 2001)

The PCI Ethernet IOA provides single attachment to one Carrier Sense Multiple Access/Collision Detect Local Area Network. The feature consists of an adapter card and internal code which supplies Ethernet version 2 and IEEE 802.3 Media Access Control (MAC) plus IEEE 802.2 Logical Link Control (LLC) functions. The Ethernet/IEEE 802.3 IOA is capable of operating in half-or full-duplex mode.

#2723 has a RJ45 connector and a 15 pin D-Shell connector for attachment of customer supplied cabling. A vendor AUI Ethernet cable or RJ45 twisted pair cable must be ordered separately.

#2723 may be installed in #6617, #6618, #5065, or #5066. When installed in #5065 or #5066, there must be a supported slot available under a #2824.

If #2723 is selected to run on #6617 or #6618, then #0221 (Ethernet on IPCS) is required for each #2723.

Prerequisite: One of the following:

#6617 or #6618 SPD card

PCI slot with required #2824 or the base controller in #5065/#5066 tower

PCI slot with required base controller in #503X Migration Tower I, or #9364/#5064 with #9329 or #9330.

PCI slots used: One.

Supported on the following systems: 150, 170, 250, 270, 400, 40S, 500, 50S, 510, 530, 53S, 600, 620, 640, 650, 720, 730, 740, 810, 820, 825, 830, 840, 870, 890, S10, S20, S30, S40, SB1, SB2, SB3