2962-8203 - 2 Port Multiprotocol PCI Adapter

The IBM Power6 8203-E4A (#2962) 2-Port Multiprotocol PCI Adapter

This adapter provides high-speed connections between stand-alone system units on a WAN. To access WAN lines, the 2-Port Multiprotocol PCI Adapter connects via external communications equipment including Channel Service Units (CSU), Data Service Units (DSU), or through synchronous modems.

This adapter together with IBM AIXlink/X.25 provides a two-port connection to X.25 packet switched networks. IBM AIXlink/X.25 is a separately orderable LPP (5696-926).

2-Port Multiprotocol PCI Adapter with an appropriate cable is compatible with:

X.21 DCE - Using 2-Port Cable, X.21 The IBM Power6 8203-E4A (#2954)

CCITT X.21 Signalling

CCITT V.11 Electrical

CCITT X.27 Electrical

EIA-422-A Electrical

ISO 4903 Connector for DCE side of an X.21 VHSI Modem Cable

V.24 DCE - Using 2-Port Cable, V.24/EIA-232 The IBM Power6 8203-E4A (#2951)

CCITT V.24 Signalling

CCITT V.28 Electrical

CCITT X.21bis Electrical and Signalling

EIA-232-C Electrical and Signalling

ISO 2110 Connector for DCE side of an V.24 VHSI Modem Cable

V.35 DCE - Using 2-Port Cable, V.35 The IBM Power6 8203-E4A (#2952)

CCITT V.35 Some signals for signalling

CCITT V.28 Some signals for electrical and signalling

ISO 2593 Connector for DCE side of an V.35 VHSI Modem Cable

V.36 DCE - Using 2-Port Cable, V.36/EIA-449 The IBM Power6 8203-E4A (#2953)

CCITT V.10 Electrical

CCITT V.11 Electrical

Attributes provided: Two high speed WAN connections

Attributes required: One PCI slot

For 8203-E4A: The IBM Power6 8203-E4A (#2962)

Minimum required: 0

Maximum allowed: 20 (Initial order maximum: 0)

OS level required: AIX 5.3 with the 5300-07 Technology Level or later. AIX 6.1 or later

Initial Order/MES/Both/Supported: Supported

CSU: Yes

Return parts MES: Does not apply

Note: Maximum of two allowed in CEC under AIX.

System maximum of 20 under AIX.

Not supported by IBM i or Linux.