AS400 ◾ IBM AS400 Software ◾ Power 10 Systems ◾ Power 9 Systems ◾ IBM Flashsystems ◾ AS/400 Service & Support

Contact us for Pricing or Questions:      (888) 682-5335          *We Ship Worldwide
6833-8205 - IBM i Series E4B, PCI 2-Line WAN w/Modem NoIOP
1824-8205 - IBM i Series E4B, Quad-port 1 Gb HEA Daughter Card
IBM AS400 iSeries 5706-8205 - IBM i Series E4B, IBM 2-Port 10/100/1000 Base-TX Ethernet Adapter IBM 5706 Dual Port Gigabit Ethernet Adapter PCI-X (10/100/1000 Base-TX) for IBM Power7 8205-E6B. The.. Product #: 5706-8205

5706-8205 - IBM i Series E4B, IBM 2-Port 10/100/1000 Base-TX Ethernet Adapter

Brand: IBM AS400 iSeries
Model Number: 5706-8205

IBM 5706 Dual Port Gigabit Ethernet Adapter PCI-X (10/100/1000 Base-TX) for IBM Power7 8205-E6B. The IBM 5706 2-Port Gigabit (10/100/1000 Base-TX) Ethernet PCI-X Adapter is a Full Duplex, dual ported, Gigabit Ethernet adapter that can be configured to run at 10, 100, or 1000 Mbps data rates on either port. The IBM 5706 adapter also supports jumbo frames when running at the 1000 Mbps speed in IBM Power7, Power6 and Power5 systems.

The IBM 5706 Dual Port Gigabit Ethernet Adapter is supported on the following Power7, Power6 & Power5 systems: 8202-E4B, 8202-E4C, 8202-E4D, 8205-E6B, 8205-E6C, 8205-E6D, 8233-E8B, 8236-E8C, 9117-MMB, 9117-MMC, 9117-MMD, 9119-FHB, 9179-MHB, 9179-MHC, 9179-MHD

The 5706 adapter interfaces to the system via a PCI or PCI-X bus and connects to a network using a 4-pair CAT-5 Unshielded Twisted Pair (UTP) cable for distances of up to 100m. AIX Network Install Manager (NIM) boot capability is supported with this adapter. A function called 'Large Send' or sometimes known as TCP Segmentation is also provided by this adapter. This function offloads the TCP segmentation operation from the AIX IP layer to the adapter for outgoing (transmit side) TCP segments. Another function known as "Checksum Offload" which offloads the TCP/UDP Checksum Operation or workload from the CPU to the adapter is also provided.

The IBM 2-Port 10/100/1000 Base-TX Ethernet PCI-X Adapter (#5706) should be considered where maximum port density is required per I/O card slot. For a suggested maximum number of adapters taking performance into consideration, refer to the PCI Adapter Placement Reference SA38-0538. If card slots are not the limiting factor and maximum throughput is required, the single port IBM 10/100/1000 Base-TX Ethernet PCI-X Adapter (#5701) is the preferred solution.

Note: For optimum performance, the adapter should be placed in a 64 bit PCI-X card slot whenever possible. The 1000 Mbps speed is not supported in Half Duplex (HDX) mode.

Attributes provided: Two full-duplex 10/100/1000Base-TX UTP connections to Gigabit Ethernet LAN(s).

Attributes required: One available PCI or PCI-X card slot

For IBM Power7 8205-E6B, the maximum 5706 features is 24 in four 5796s.

OS level required: IBM OS400 V5R4 with V5R4M5 machine code or higher, AIX V 5.3, 6.1, 7.1 or higher, Enterprise Server 10 SP1 for POWER Systems, or later. Red Hat Enterprise Linux for POWER, version 4.5, or later. Red Hat Enterprise Linux for POWER, version 5.1, or later.

Maximum allowed: 24 (Initial order maximum: 24)

System maximum of 24 in 4 x #5796