#5104 Dual Line Cords - 840 CEC

(#5104) Dual Line Cord - 840 CEC

(Only available as REFURBISHED as of October 1, 2004)

#5104 provides dual line cord capability for the Model 840/SB3 system unit and #9079 Base I/O Tower. Two #14XX line cords are required on the Model 840 system unit, and on the #9079 tower when this feature is ordered initially or as an upgrade to a Model 840. When ordering #5104 alone as an MES, an additional #14XX line cord is required for the system unit, and for the #9079, for a total of two line cords on both the system unit and the #9079.

If the Model 840 is ordered with the #8079 Optional Base I/O Tower, this feature provides dual line cord capability for the Model 840 system unit and the lower unit in the #8079. Two #14XX line cords are required for the Model 840 system unit, and for the lower unit in the #8079 when this feature is ordered initially or as an upgrade to a Model 840. When ordering #5104 alone as an MES, an additional #14XX line cord is required for the system unit, and for the lower unit in the #8079, for a total of two line cords for on both the system unit and the lower unit in the #8079. #5105 is required for dual line cord capability for the upper unit in the #8079. This feature has country specific usage.

OS/400 V5R1 plus PTFs, or later, is required. For required PTF information, refer to Informational APAR II12950 at:

http://as400service.rochester.ibm.com/ supporthome.nsf/document/10000035

Supported on the following systems: 840, SB3